Sunday, July 17, 2011

Cisco PIX/ASA RemoteVPN 配置


step1: ubuntu 11.04 crypto isakmp policy 1 authentication rsa-sig encryption des hash md5 group 2bt4 lifetime 86400 step2: crypto isakmp enable outside step3(option):思科路由器 如果VPN通道上有NAT设备要打开NAT-T For example, enter the following command to enable NAT-T and set the keepalive to>BT4无线网络密码破解 其实这个也未必要配置上,不配上也能建立remoteVPN,在vpn客户端上打开NAT-T就好了step4 配置隧道分离 access-list Internet extended permit ip 192.168.91.0 255.255.255.0 172.16.100.0255.255.255.0172.16.100.0 是remoteVPN客户端的地址池 access-list Split_Tunnel_List standard permit host 0.0.0.0group-policy [...]



Published by
Published by xFruits
Original source : http://www.vpn123.tk/?p=901...

No comments:

Post a Comment